Wood veneer is a fragile product marketed in bundles of 32 leaves. It needs to be stored in a climate-controlled environment, as excess heat and/or dryness can cause wood to split and/or crack. With wood veneer in rolls we solve these problems. In addition, this product is ideal for selling the veneer in large sheets.
Do you want to know more about this product?
We manufacture wood veneer in master rolls. This product is most suitable for retail stores, as it can be sold by meters. To simplify retail sales, rolls are marked by meters.
The veneers are jointed with our irregular zig-zag finger joint. The back liner tissue which holds the joint, acts as a supporting surface during cutting and separation process.
Thus avoiding possible breakages.
All our wood products come from sustainably managed forests. Check our FSC declaration here.
Be inspired!
Visit our Pinterest and discover new decorative ideas. Enter our Pinterest and discover new ideas to decorate your melamine boards.
Hot Melt Pre-Glued
A coat of thermofused glue can be applied to the backside of the veneer master roll. This glue will melt at 180º.
This product is for application with an iron. The hot melt glue uses heat to bond the veneer to the board. We apply a 120 gr/sq m of glue on the backside of the veneer. This quantity is the correct one to avoid gluing problems and at the same time to avoid excessive glue in the joint between the sheet and the surface to be coated.
The softening point of our glue is 85-90 º C ( temperature at which the glue will begin to melt).
Hot Melt Pre-Glued
Soft Sanding
The upper face of the veneer can be sanded, thus avoiding the costly manual work of sanding by the customer.
When sanding on the veneer sheet, it is advisable that it has a fleece on the back side to give it more consistency.
Soft Sanding
Fleece Backed Edging
Fleece is a backer that is applied to wood veneer in a lineal process to produce continuous rolls for many different purposes.
This fabric is attached to the wood with two possible types of glue:
PVA (white glue). With different grades of resistance to humidity (D3, D4).
PUR (polyurethane). For maximum resistance to humidity.
With weaving we achieve two things:
We have different types of fabrics depending on their weight. The more grams the fabric has, the more consistency and flexibility it adds to the veneer, and we have different types of fabrics depending on their grammage. The more we reduce the thickness of the veneer, more flexibility is conferred to it.
30 grms fleece details (beige, dark brown and black colour).
Fleece Backed Edging
Textures and embossings
Following the actual surfaces trends, we can apply different embossing to our veneer edges, enhancing the visual experience of real wood with natural tactile effects.
We have created embossings that feel and look like raw and finished woods. Our embossings can be strong and aggressive, transversal or with saw cut marks, conferring perfection not only in optics but also in haptics to our veneer sheets. Contact our sales department for more information.
Textures and embossings
Natural species
0,5 – 0,6 mm thick natural veneer sheets.
We can produce with any of the species available on the market. Veneer process
Veneer process:
Natural species
Fineline Veneers
0,5 – 0,6 mm thick fineline veneer sheets.
Fineline veneer is made of low grade wood which through a special process, is dyed by immersion, pressed to form a block and finally cut into sheets obtaining the required grain design.
We can produce with any available species on the market
See some examples
The fineline or reconstituted veneer is a thin veneer sheet obtained through lamination process beginning at the edge of a veneer block, thus obtaining a perfectly homogeneous or straight grain. While manipulating the contour of the sheets to be pressed, various configurations and very attractive aspects are obtained.
Some or all the sheets can be dyed before joining them, so as to create astonishing aspects and colours .
Production process:
Fineline Veneers
Dyed veneers
Dyed veneers are obtained when natural veneer sheets are immersed in a staining solution, which penetrates to the core of the veneer.
0,5 – 0,6 mm thick natural veneer sheets.
The entire thickness of the sheet (up to the center) is tinted. This process enables to vary the veneer’s natural colours resulting in:
We can produce edge banding with any of the available species on the market, and obtain the customer’s required tone.
Dyed veneers
Cross Grain Veneer
Cross Grain Veneer
Burl and veneer roots
A burl is a tree growth in which the grain has grown in a deformed manner. Unknown as to how this deformity develops on a log, it features an irregular pattern opposed to a smooth lineal aspect. Veneer burls are both present underground or at surface level of the tree trunk. It is commonly found in the form of a rounded outgrowth on a tree trunk or branch.
We can produce with any available species on the market
Burl and veneer roots
Thermo-treated, smoked and aged veneers
They are natural veneers which due to their exclusivity, are mainly used for special decorations.
It is the resulting reaction of veneer to paper products, enhancing its originality, warmth and distinction, attributes that cannot be copy with printed paper.
We can distinguish the following variations of natural veneers:
Thermo-treated:
– 100% natural process applied in order to modify the original wood colour, without intervention of any chemical element.
– Colour much more uniform, almost to the level of a stained product.
– Colour sustainability, as it is free of any type of dye which could react to UV light and therefore generate tonality changes.
Smoked (Fumé) Veneer
-Aesthetically, it is a natural veneer which features a smoked look, shinny and enhanced by a 3D effect, maintaining live stripes and highlighting the aspect of each log.
– The smoked is a treatment based on the reaction of the veneer natural tannins to different chemical agents which change the original colour of the veneer without loosing its natural look. During the smoking process, the chemical elements are neutralized, thus ensuring a 100% natural PH product.
Aged Veneers
– This accelerated process has the purpose of featuring a natural aged aspect to the veneer when exposed outdoors.
– Grey tones which do not follow a set pattern are thus obtained, transferring to the final product a look of aged wood due to sun and weather exposition.
– Especially suitable for a rustic touch, cracked, with knots, releasing a unique and different look. Most appropriate product for interior decoration purposes.
Thermo-treated, smoked and aged veneers
Sawcut Veneer
Following latest trends, we offer the rustic look of saw cut veneer. We offer nature-saw-cut in the most common veneers on the market.
Deep transversal print embossed in such a way that some prints stand out while others are embedded. Two different types of prints can be visualized, depending on the inclination:
Standard thickness is 0,7 mm, but superior thicknesses can be produced. The visual effect is eye catching and enables a wide range of design applications.
Sawcut Veneer
Printed veneer
For special edge and moulding applications, a grain design can be printed over a different veneer.
Using more economical species as a base, we can print the natural pattern or design of highly valued veneers with a matching tone. Just imagine a low cost veneer such as okume, over which we will print the grain and tone of, let us say, Rosewood Rio or Makassar Ebony. As the base of the product is authentic veneer, the touch and pore of the product will transfer the sensation of the natural pattern.
Thanks to our printing technique we can obtain quarter cut patterns which prove to be difficult to find in extra wide formats (for example, 20 cms).
Printed veneer
Elaboration of customer’s veneer
For personalized projects, working with the customer’s veneer is an option we offer.
In projects where the surface and the edge need to be from the same source, we can manufacture the product with our customer’s material.
For more information, feel free to contact us, we will clarify any doubts you may have.
Elaboration of customer’s veneer