The special underlayer on the back of the edgeband has the same colour than the main part of the edgeband, and most probable it also has the same tone as the surface of the board. Thanks to this, the joint is less visible as there is no intermediate body, such as the glue, in a different tone.
The laser and the hot air technologies can be considered as one of the most recent innovations of the edgebanding industry. The objective of these skilled techniques is making the joint between the edge and the surface almost invisible for the customer. For this reason it is known as Zero Line.
In Cantisa we have available two different versions of Zero Line edgebanding. They are known as pre-glued and direct coextrusion.
Do you want to know more about this product?
The edge with pre-glued laser preparation is also known as laser preparation. Based on a Standard edge a thin special underlayer is implemented on the back of the edge.
This special underlayer is the one that melts and subsequently penetrates on the agglomerate. Depending on the color of the melamine and our edge, we use one color or another.
We recommend a prior test of our product so that the client can assess the optimal result of the joint.
Minimum order: one roll.
Possible widths: from 19mm to 60mm.
Finishes and thicknesses: all PVC finishes.
For diode, hot air and NIR machines.
This product is made of polypropylene. A back layer of a special plastic material is applied, of the same colour as the surface, forming a single body.
We have some references in stock in 1mm, with a minimum order of one roll. Please contact us for minimums on colours not in stock.
This edge can be used in laser diode, hot air and NIR (New Infrared Radiation Processing) technology machines. Available in any width.
We recommend a prior test of our product so that the client can assess the optimal result of the joint.
Minimum order: one roll.
Possible widths: from 19mm to 60mm.
Finishes and thicknesses: all PVC finishes.
For diode, hot air and NIR machines.
The edge with pre-glued laser preparation is also known as laser preparation. Based on a Standard edge a thin special underlayer is implemented on the back of the edge.
This special underlayer is the one that melts and subsequently penetrates on the agglomerate. Depending on the color of the melamine and our edge, we use one color or another.
We recommend a prior test of our product so that the client can assess the optimal result of the joint.
This product is made of polypropylene. A back layer of a special plastic material is applied, of the same colour as the surface, forming a single body.
We have some references in stock in 1mm, with a minimum order of one roll. Please contact us for minimums on colours not in stock.
This edge can be used in laser diode, hot air and NIR (New Infrared Radiation Processing) technology machines. Available in any width.
We recommend a prior test of our product so that the client can assess the optimal result of the joint.
All our wood products come from sustainably managed forests. Check our FSC declaration here.
Be inspired!
Visit our Pinterest and discover new decorative ideas. Enter our Pinterest and discover new ideas to decorate your melamine boards.
